Setting Time Periods

Press PROG on the timer the programming screen is displayed on the timer:

The lightbulb icon says you are about to enter an on-time for the timer. You can select days of the week by pressing DAY. It will cycle around:

• All days (mon to sun); Individual days (mon, tues etc); Monday to Friday; Friday to Sunday; Saturday and Sunday

Enter a start time by pressing Hr and Min buttons then press Prog to store this on-time

The off-screen screen is displayed (lightbulb with an 'X')

Select the same days of the week as you chose for the on-time using the Day button

Enter an off-time using Hr and Min buttons then press Prog button to confirm the settings

You can either enter another on and off-period or press prog twice complete setting the timer

Make sure timer is set to Auto. Press and hold Min button for 5 seconds to move between On, Off and Auto